Compressed Air

Air powered tools in construction range from stapling guns to jack hammers. If not treated with respect, these tools can become a powerful enemy rather than a servant.

  • Compressed air must not be used to blow debris or to clear dirt from any worker's clothes.
  • Compressed air must not be used to blow dust, chemicals, metal filings, etc. from work surfaces. Surfaces should be swept clean.
  • Ensure that the air pressure has been turned off and the line pressure relieved before disconnecting the hose or changing tools.
  • All hose connectors must be of the quick disconnect pressure release type with a "safety chain / cable".
  • Wear personal protective equipment such as eye protection and face shields, and ensure other workers in the area are made aware of or have restricted access to the hazard area.
  • Hoses must be checked on a regular basis for cuts, bulges, or other damage. Ensure that defective hoses are repaired or replaced.
  • A proper pressure regulator and relief device must be in the system to ensure that the correct desired pressures are maintained.
  • The correct air supply hoses must be used for the tool / equipment being used.
  • The equipment must be properly maintained according to the manufacturer’s requirements.
  • Follow manufacturer's general instructions and comply with legislated safety requirements.